I've tried searching but haven't had any luck. Does anyone know the fret dimensions on the silver sky? I know they are vintage and I reached out to PRS customer support who also replied vintage frets, but I was curious about actual dimensions. I know vintage (or medium jumbo, etc...) can take on different meanings depending on supplier, etc...
Thanks!
this was from an early forum post and said they were close to 6230's (0.08" x 0.037") and fender says 6230: The smallest fret wire found on older Fender necks (.078″ x .043″). those values are from warmoths and fender measurements so take it for what it with at grain of salt.
Here is the description from the forum.
Name: Silver Sky
Colors: Onyx, Tungsten, Horizon, Frost
Body: Alder (2 or 3 pieces)
Polyester base coat, Acrylic urethane top coat. (Standard for PRS)
Body shape inspired by DC3 and tradition
Scoop/finger carve: different color than rest of guitar body
Neck: Maple (scarf joint)
Nitrocellulose Finish
Fretboard: Indian Rosewood (Slab board)
Scale length: 25.5”
Nut: Bone, Width: 1 21/32”, width at body: 2 7/32”, Depth at nut: 53/64”
Radius: 7.25”
String Gauge: 10-46
Fret Wire: Tall/Narrow. Similar to Dunlop 6230
Neck shape: “JM” Carve. Between C & D. (Flat back - wide shoulders)
Inlays: Small Birds (synthetic)
Headstock: Upside down PRS, with kick-out on treble side for better access.
Pickups: PRS 635 JM proprietary Single Coil.
Output: 6.4k
Middle pickup reverse polarity for hum cancelling
All three pickups same specs
Switching: 5 Way (traditional-style)
Volume (Master), Tone (Neck/Middle), Tone (Bridge pickup)
Pots: 300k volume, 250K Tone
Bridge: All Steel. PRS Gen III-style plate, bent steel saddles
Gen III Knife Edge Screws
Same size screws as Gen III: height adjustment, intonation, trem arm screw.
Tuners: PRS Vintage-Style Locking w/ nickel cap screws
Pick Guard: White/Black/White
Truss Rod: PRS Dual action
Jack: Molded Zinc, Nickel plated.