DHW
New Member
- Joined
- Feb 18, 2014
- Messages
- 705
Hi all,
I just registered and have a question.
I recently picked up a NOS 2010 single cut korina SE as well as a 2013 se 245(first prs guitars). The korina has some pretty significant bridge lean to it which I understand is fairly common. The 245 has a little play in the bridge but overall the fit is much better. I am definitely wanting to replace the studs on the korina and possibly the 245 but have no idea what I need to order. The tonepros site has no real description on any of the parts. I would prefer the vintage steel but those are only available in "G" style which I assume means gibson style with the non-rounded, smaller heads. The "P" style with the rounded tops like are on the guitars do not come in the vintage steel. And then there are all these other brands....
What part brand and part number do I need to order to accomplish this job to the best effect? I am prepared to use some teflon tape on the korina to snug the threads if need be unless someone is selling them with the PRS size inserts. I would prefer to not tape the 245 so not sure if I should look at swapping them on that one or not. I would be doing it for additional sustain and security whereas the korina it is to get the bridge level.
I just registered and have a question.
I recently picked up a NOS 2010 single cut korina SE as well as a 2013 se 245(first prs guitars). The korina has some pretty significant bridge lean to it which I understand is fairly common. The 245 has a little play in the bridge but overall the fit is much better. I am definitely wanting to replace the studs on the korina and possibly the 245 but have no idea what I need to order. The tonepros site has no real description on any of the parts. I would prefer the vintage steel but those are only available in "G" style which I assume means gibson style with the non-rounded, smaller heads. The "P" style with the rounded tops like are on the guitars do not come in the vintage steel. And then there are all these other brands....
What part brand and part number do I need to order to accomplish this job to the best effect? I am prepared to use some teflon tape on the korina to snug the threads if need be unless someone is selling them with the PRS size inserts. I would prefer to not tape the 245 so not sure if I should look at swapping them on that one or not. I would be doing it for additional sustain and security whereas the korina it is to get the bridge level.