This is my current board...
Signal chain: guitar -> Hotone Soul Press mini wah -> Turbo Tuner -> Xotic SP -> Archer -> OCD -> Secret Freq -> H2O -> T1M buffer -> Mark V input -> Mark V Loop out -> EWS Scott Henderson Subtle Volume Control -> M5 -> Mark V Loop In
I've set it up so the pedals I reach for most frequently during a song (as opposed to between songs) are on the first row... The Mesa Footswitch can control full channel switching (1/2/3) or Channel/Solo (1/2, solo boost) depending what band I'm playing with. All of it is wired to the amp using a Pedal Snake with three mono lines for the audio signal and a TRS-2Xmono line for the footswitch. One power supply means one plug powers everything...
I had to mod the board slightly... I drilled four pilot holes to mount the power supply, which didn't quite clear the floor when added, so bought a set of 7/8" rubber feet from Home Hardware which I cut down to about half their original height and superglued to the existing Pedaltrain feet. I know there are much cleaner cable routing options available, but I always liked electrical tape for it's ease of use, flexibility and re-usability...
I've been using this board for about half a year now and it's gained some grime... but it works really well... I'm especially pleased with the Hotone wah and the EWS volume; they work brilliantly and use up so very little stage space...
And here's my grab'n'go mini board... I use this mostly with my TM60 or TA-15 when running out to jam somewhere... It's powered by a Pedaltrain Volto rechargeable power supply slung underneath...