Adding Dragon II and push/pull pots to se 245

[Kev Ag]

Hi, I was looking at buying a set of dragon ii’s and wanted to see if anyone had a wiring diagram from adding a set of push/pull pots and a break down of the wires on the dragon pickups. Thanks!

 

[JJJ]

From PRS website

https://www.prsguitars.com/documents/prs_s2_singlecuts_wiring_schematics.pdf

https://www.prsguitars.com/documents/594_2017.pdf

If you want to wire up the coil taps the way PRS does you need to add resistors as per diagrams

 

[Kev Ag]

The s2 singlecut wiring is calling for .033 uf capacitors. I think my SE has .022 uf capacitors. Do you think those can be re-used? Or should I try to find a set of .033 uf’s?

 

[JJJ]

The s2 singlecut wiring is calling for .033 uf capacitors. I think my SE has .022 uf capacitors. Do you think those can be re-used? Or should I try to find a set of .033 uf’s?

not sure you would hear much difference tbh... but they're cheap parts so try it and see

 

[Kev Ag]

not sure you would hear much difference tbh... but they're cheap parts so try it and see

I got all the parts I need! Only need to do the work now. Thanks for the help!

I will update this with a before and after when I finish!