Question about PRS Volume potentiometer specs.

[SE24custom]

Hi everyone,


I have a SE 24 custom with a floydrose wammy - I believe I got it in 2022.

I was wondering what the volume pot resistance might be. I’ve tried looking on the net but with no specs on the either pot (potentiometer).
Inside the outsercasing doesn't have the resistance (just has made in Korea A 321)


I want to replace it with a two in one potentiometer for a second pickup I bought for something else. I know there are dual volume pots out there but I need to match the pots so that everything will work properly.


My second questions would be does PRS make dual pots and how much would they be?


Thanks a bunch!

R

 

[JasonE]

The guitar has two humbuckers in it. The pot is more than likely 500K.

 

[Bogner]

The guitar has two humbuckers in it. The pot is more than likely 500K.

+1

 

[SE24custom]

Thanks guys for the info on the pots. I didn't want to unsolder the pot and measure it then solder everything back -
that would be a bummer.

 

[Senor Verde]

I've only had core PRS guitars, but some of the pots I've measured were around 500K, but many were a bit lower. One push-pull pot measured 390K, which is pretty low. I'd just get a 500K and start from there.

 

[Black Dog]

They should be 500K alpha pots.

 

[aphantomvaper]

You may have to unscrew and flip over the pot to see the value on the top lip. Prob a 500 thats pretty standard.

 

[ViperDoc]

Those pots have a 20% tolerance, so the value is anything between 400-600k on paper. I’ve never seen two pots with the same value when building amps. I test every pot and label it. Same goes for components.