So here's the plan: the Bernie is going to be a tribute to my favorite guitarist: Jeff Beck.
Seymour Duncan wound the pickups in the Black/Oxblood '54 LP Jeff Beck used on Blow By Blow. That guitar has a '54 style wrap around bridge/tailpiece like Black Bernie and it originally had P90's but they were replaced by one of Seymour's first JB sets.
I have a JB I put a roughcast A5 magnet in like Duncan uses in the Duncan Custom Shop for the JB. Makes it smoother and a little less sharp.
And I have a Duncan 59B that measures the same DCR as a PRS Dragon 1 neck.
The Dragon 1 neck has an Alnico 4 magnet like a 59 Gibson PAF. So that's what I put in in that Duncan and I'll use it as the neck pickup.
I'll split the neck pickup through a 1.1K resistor on one push/pull pot.
With another push/pull pot I'll have the option of series or parallel for the JB bridge pickup. Parallel gives a stronger sound than split, it's noiseless, but it sounds like two single coils both on.
It'll be cool and I'm working on it right now.
Here's a shot of the parts just laying on the guitar.