Good Day folks. I just got my 2021 Tremonti SE. WOW! I LOVE it but.... I cannot leave well enough alone. I ordered PRS push pull pots to split the bridge coil (I understand that is the only one I can split). I am simply NOT understanding how I need to wire it. I have opened the cavity and documented all the current wires Can anyone point me in the right direction, or correct me if I cannot split the coils?
Here is what I am finding:
Bridge Pickup Volume Pot:
Red & Black Wires Taped off.
White Wire to Volume Pot Left tab
Dark gray/Black wire to Volume Pot Casing
Bridge Pickup Tone Pot:
Green Coax - Outer Braided Wire connects Volume Pot Casing to Tone Pot Casing, White wire Connects White from Pickup to Center tab on Tone pot
0.022UF capacitor from left tab to Pot case
Neck Pickup Volume Pot:
Green and White Wires Taped Off
Black Wire To Volume Pot Left Tab
Dark Gray/Black Wire to Volume Pot Casing
Neck Pickup Tone Pot:
Green Coax - Outer Braided Wire connects Volume Pot Casing to Tone Pot Casing, White wire Connects White from Pickup to Center tab on Tone pot
0.022UF capacitor from left tab to Pot case
I have a drawing, but I cannot figure out how to post it. Does it sound like my pickups are coil split capable?
If so, does anyone have a simple diagram on what wire to connect where on the push pull Pots?
Any help is much appreciate.
Thanks in advance.
Rich
Here is what I am finding:
Bridge Pickup Volume Pot:
Red & Black Wires Taped off.
White Wire to Volume Pot Left tab
Dark gray/Black wire to Volume Pot Casing
Bridge Pickup Tone Pot:
Green Coax - Outer Braided Wire connects Volume Pot Casing to Tone Pot Casing, White wire Connects White from Pickup to Center tab on Tone pot
0.022UF capacitor from left tab to Pot case
Neck Pickup Volume Pot:
Green and White Wires Taped Off
Black Wire To Volume Pot Left Tab
Dark Gray/Black Wire to Volume Pot Casing
Neck Pickup Tone Pot:
Green Coax - Outer Braided Wire connects Volume Pot Casing to Tone Pot Casing, White wire Connects White from Pickup to Center tab on Tone pot
0.022UF capacitor from left tab to Pot case
I have a drawing, but I cannot figure out how to post it. Does it sound like my pickups are coil split capable?
If so, does anyone have a simple diagram on what wire to connect where on the push pull Pots?
Any help is much appreciate.
Thanks in advance.
Rich