JasonE
New Member
If they get a lot of feedback about not having the TSA locks on it they may change the latches to have them. I could see that happening.
I wasn't trying to tell you what's, what... that's why I said, "AFIK". As I mentioned earlier, I haven't flown since before 9/11.
But I do know there is a distinction between TSA vs ATA, and just wanted to put that out there for people who didn't know.
Since you know about TSA requirements, is a lock even required?
That looks like it is designed for a zip tie to run through there instead of a lock. You may be able to find a lock that uses a steel cable that may fit through there.I just noticed that the latches do have pass throughs for very small locks. I'm not sure that it would take a whole lot to just break them by force.
My biggest complaint about the case so far is that my PRS leather strap doesn't really fit in either compartment. I mean, I can get it in there but it's very very tight.
That looks like it is designed for a zip tie to run through there instead of a lock. You may be able to find a lock that uses a steel cable that may fit through there.
Great info. Sticky worthy."Thank you for writing PRS Guitars. For your S2 Singlecut Semi Hollow you would want the D1 style ATA case, which is designed to fit PRS classic-perimeter body shapes and Singlecut designs (core, Bolt-On, S2, SE). The D2 ATA case would be more for our slab-body models, like the NF53, Silver Sky, Fiore, and Myles Kennedy. I hope you find this information helpful."
That looks like it is designed for a zip tie to run through there instead of a lock. You may be able to find a lock that uses a steel cable that may fit through there.
"..... And thanks for all the fish......."
I just noticed that the latches do have pass throughs for very small locks. I'm not sure that it would take a whole lot to just break them by force.
@deathworlder noted the (Sweetwater?) description:That looks like it is designed for a zip tie to run through there instead of a lock. You may be able to find a lock that uses a steel cable that may fit through there.
Update on the D1 Molded ATA case:
I received my new ATA Molded Multi-Fit case from Sweetwater a couple days ago. My Sweetwater rep told me it wouldn’t ship out until May, but it shipped immediately.
He said he can’t get any info on why the listing isn’t live, but they got em and they’ll ship them to you if you reach out directly. Ask for Edward Vigen, he’s efficient.
I just checked and they do have listing for a D2 demo model at a 10% discount at the moment. The specs in the photo were exactly the same as the ones for the D1 though?
As for the case, it’s great. VERY light! Well made, sturdy. They didn’t skimp on quality. One thing that I noticed in the photos was the exterior strip of metal with the bird logo looked flimsy, but it is not. It’s a solid slab of metal, classy.
I wasn’t sure about the fit for my 2017 S2 Singlecut Semi-Hollow at first though. The outer dimensions were perfect, the case hugs the body perfectly without squeezing it. The lining is very plush and thick. But the neck didn’t sit perfectly flush into the neck cradle and there was a slight gap below the neck block heel and the bottom of the upper bout. There was definitely a little see saw action going on.
But the lid has great cutouts to protect the top of the guitar (and a well designed pillow to put just a little pressure on the top bottom of the guitar, right in the middle of the lower bouts) so I figured it’d be safe to test my theory. Which was that if I left it in the case for a couple days, the thick padding would compress enough in the right spots for the body to lay flat.
Sure enough it did, the case molded right around the guitar. Fits perfectly now, no see-saw action. At first I figured if it didn’t work it’d still be a great case for home storage/humidity control. Maybe around town now and again. Now I’d definitely feel comfortable flying with it, or shipping.
Because of the recessed spots on the lid I still don’t see any indication that any of the hardware is being pushed upon. I can barely see where the toggle switch hits the lid and that’s probably only because I’m looking for it.
Headstock protection is great. I would post pictures, but it seems the only way to do that is through a separate app like YouTube or Facebook?
Anyway, I highly recommend grabbing this case if you’re lucky enough to have a 2017 S2 Singlecut Semi-Hollow. I bet it would work great for all the others with similar dimensions as well
I would post pictures, but it seems the only way to do that is through a separate app like YouTube or Facebook?
I use Imgur. There are undoubtedly others.