blues guru
New Member
- Joined
- Apr 26, 2022
- Messages
- 25
hello everyone been trying to set up my McCarty 594 and I'm running into problems. Changed the nut to bone and if I want everything to intonate ate the first fret I have to lower the action on all the strings to the point where my high e would buzz. It won't stop buzzing no matter how much I raise the action from the bridge or increase the relief in the neck. The action at the first fret as I set it now is .58-.48 from the low e to the high e., which is 0.02mm lower then the highest setting according to PRS spec sheet. Bummed out if I don't get this fixed I would not be able to send it to a PRS Tech center for about a whole year or I'll just forget about playing all together as this is the only guitar I own. I would appreciate any suggestions or help anyone can give me. Thanks in advance