CE 24 push pull wiring question

BobVila406

New Member
Joined
Jul 8, 2015
Messages
37
I was thinking I'd like to have my CE24 be wired so that the bridge is humbucker and the neck is split,. Pulling the knob splits the bridge and the neck switches to humbucker. Is this possible or would I need to add a second push pull pot to the guitar?
 
Last edited:
Yep, super easy. You just have to move one wire (or one pair of wires depending on what year it is).

Right now, tap wires for both pickups are connected to the push/pull lugs closest to the pot. Move the neck pickup wire to the lug furthest from the pot. Done!
Thanks!!
 
I have two guitars set up to split bridge and leave neck as HB.

I like this combo.

Two push pull pots will work.

Have vol pot split one and tone pot split the other.
 
Back
Top