The Trem Spring Damping Solution

Here's the video I saw about this subject, so it's not my original idea:

https://www.youtube.com/watch?v=CJnAbPrmJNA

I did this a little different; we didn't take the extra time to measure first, we just inserted the line into the spring, then used a very small nosed wire clipper to trim. So there's enough trim left over that you could pull them out with a pair of needle nose pliers if you wanted to in the future. Also the Home Depot tubing referenced above is red, not clear.
 
Installed this remedy on a Brand 'X' Guitar. Works exactly as described.

best-1_zpsxozuesya.jpg
</a>"]http://[/URL][/img]
 
I cannot say I completely get what the problem is that this is solving?
 
I'd never considered this an option. On guitars that I don't use the trem on, I'd just lay foam in there (if it bothered me) or a lot of times, I ignored it. This seems like a nice solution.
 
I just want to say that I watched the video and I thought him blowing out playing malmsteen at the end was comical. I used to own one of those strats. Such a neat jammer.
 
I hard tailed my Strat a long time ago and a friend suggested I may get spring ring (hmm, that's quite good "spring ring" :D) doing it. I'd never heard of it previously and I can't hear any difference to the way it was before.
 
I typically like the 'reverb' effect some trems offer. However, I have come across a couple of guitars that would get a very annoying resonant frequency 'spring ring' when certain notes were played, and a right-sized piece of soft foam stuffed between the springs and the body wood fixes that without any negative effects, and it's quick and easy.
I would think that soft tubing inside the springs would either over dampen or rattle... ??
 
Just turn it up! That's why they invented 100 watt tube heads! Since my prs guitars have 4 springs I opted for the 5150 120 watt head, that extra 20 watts. zaps that 4th spring real good!!!!!!
 
Back
Top