Recent content by huffe

New day, new adjustments! Looks like this particular neck needed just a tad more bow in it than "normal" to get it right. I used a long straight steel ruler to sight on the 8th fret area, loosened the truss a bit and adjusted the tremolo after. Much better. I still believe the nut slots are a...

Thanks. I too think the nut is a bit low on this guitar. You're right, my saddles are not aligned good. I will make an attempt tomorrow for some new small adjustments. I will also check relief properly with a ruler. Will report back.

When I press down on the third fret the string is baaaaarely clear of the first fret on the low E and A, the D is touching the fret...no movement if i touch the string while holding down. Interestingly, on my other prs guitar here I can clearly see the string move when I touch it while holding...

The credit card check seems fine. Doesnt rock. Height from top of fret to bottom of string is now aprox 3/32" or 2.4mm. So a bit more than prs spec..

Thanks for the reply. I see your point, no point trying to make it buzz. But yeah, i can hear it sometimes. Not bad, but irritating. And I would very much like to have the action a tad lower than today. I like some height, but not too much..

I generally do set-ups myself on my PRSi, but I recently bought a 2010 DGT and i'm having some trouble setting it up correctly. Tall frets causing some frustration! It has 11-49 strings installed. Problem: It's buzzing on the lower frets when i strum a little hard on especially the low E and...

This great thread needs some lovin'. My DGT accompanied by my soapbar and CE. :)

How has the DGT evolved through the years? Which year did the new "open back" tuners become standard? Any other differences in specs from 2007 -> 2015? (and of course the launch of the standard model in 2012) edit: Found this piece of unofficial info: "Originally Posted by Berlin Chris...

I have one more question: When I look at the spec sheets for different guitars on the PRS site, they don't mention a whole lot of fret sizes. I love my fret design/height on my CE 22, but how do I know what PRS is similar to that feel if I'm getting a second guitar? I know for example that the...

Thank you! I've now ordered some different values of ceramic caps. Lets hope this does the trick. :) H

Hello, I have a '01 CE with the original PU's (Dragon II) and original rotary switching like this one on the top: http://prsguitars.com/csc/schematics/schem08/custom5wayrotary.pdf The problem is when I turn down the volume pot from 10 to 8 (and down), almost all my treble cuts off, and the...