Hi all, Ive just done the O/P tranny mod to a 50W O/P transformer, checked all the wiring etc, and now no sound on either channel.
The transformer I chose is rated at 50W and stipulated for 6L6's, and was intended for a Fender Pro Reverb.
Ive checked around for signal (with scope) and find its not ariving at the P/I valve, it gets as far as V2 and a cap and resistor then I loose it. (would be easier with a schematic)
Any sugestions would be greatly received, Bob (AmpERe)
The transformer I chose is rated at 50W and stipulated for 6L6's, and was intended for a Fender Pro Reverb.
Ive checked around for signal (with scope) and find its not ariving at the P/I valve, it gets as far as V2 and a cap and resistor then I loose it. (would be easier with a schematic)
Any sugestions would be greatly received, Bob (AmpERe)