Hi all.
Long time lurker and decade and some change noodler. I've tried a lot of import guitars, and PRS is the one I always come back to.
Got a very lightly used SE custom 24 ok craigslist. Love the way it plays and the sounds (especially the neck pup split) and I've decided I'm tired of taking my geetars to techs for setups and adjustments. I have the relief at about .011 at the 8th fret, but the bride is tricky. I'm wondering if you have any tips to set the radius at the saddles and keep them level, in addition the correct action measurement at the 12th fret.
The setup page says 12th fret should measure 2/32nds e to e, but I've read a few posts that say 5/64ths on the low side and 2/32nds on the high.
I didn't touch anything other than the truss rod, saddles and claw spring, as my lurking has informed me off the danger in adjusting the six mounting screws.
Thanks in advance! Pictures of my new acquisition on request! Ha.
Long time lurker and decade and some change noodler. I've tried a lot of import guitars, and PRS is the one I always come back to.
Got a very lightly used SE custom 24 ok craigslist. Love the way it plays and the sounds (especially the neck pup split) and I've decided I'm tired of taking my geetars to techs for setups and adjustments. I have the relief at about .011 at the 8th fret, but the bride is tricky. I'm wondering if you have any tips to set the radius at the saddles and keep them level, in addition the correct action measurement at the 12th fret.
The setup page says 12th fret should measure 2/32nds e to e, but I've read a few posts that say 5/64ths on the low side and 2/32nds on the high.
I didn't touch anything other than the truss rod, saddles and claw spring, as my lurking has informed me off the danger in adjusting the six mounting screws.
Thanks in advance! Pictures of my new acquisition on request! Ha.