D
Deleted member 7139
Guest
I have a PRS Custom 24 with a 5way blade made in 2012
The wiring should be the following: https://www.prsguitars.com/csc/schematics/2012/custom24_2012.pdf
Currently has 59/09
I'm going to install a nailbomb set, and I wanted to know if there's a way to mantain the original wiring/switching positions.
I know that sometimes PRS (especially with older 5 way rotary - not sure about the current blade) requires the neck pickup with reversed magnet, but I already got the nailbomb calibrated set.
I also know that with phase problems, it's just required to flip hot and ground wires to solve the problems of middle positions.
Can you help me out with the installation of my newly acquired BKP into my prs?
If possible, I'd love to keep the current switching. If not, I can live with other wiring types (like the Ibanez 5 way blade [Bridge , Bridge+Neck Split, Bridge+Neck series, Neck Parallel, Neck] or other useful 5 way blade wiring schematics)
Thanks in advance!
The wiring should be the following: https://www.prsguitars.com/csc/schematics/2012/custom24_2012.pdf
Currently has 59/09
I'm going to install a nailbomb set, and I wanted to know if there's a way to mantain the original wiring/switching positions.
I know that sometimes PRS (especially with older 5 way rotary - not sure about the current blade) requires the neck pickup with reversed magnet, but I already got the nailbomb calibrated set.
I also know that with phase problems, it's just required to flip hot and ground wires to solve the problems of middle positions.
Can you help me out with the installation of my newly acquired BKP into my prs?
If possible, I'd love to keep the current switching. If not, I can live with other wiring types (like the Ibanez 5 way blade [Bridge , Bridge+Neck Split, Bridge+Neck series, Neck Parallel, Neck] or other useful 5 way blade wiring schematics)
Thanks in advance!
