the_doc735
New Member
- Joined
- Mar 29, 2020
- Messages
- 52
Yeah they look good.
The top one splits neck to slug and bridge to screw.
The bottom one splits neck to screw and bridge to slug.
If you want to keep the PRS style of splitting both to screw, just wire the bridge split the same as the neck split. Green/White to middle lug of your mini switch, and the bottom lug of switch to ground.
Most people like to split neck to screw since it's closest to the neck for the fullest sound. (Stock PRS wiring)
If you split neck to slug, it will not sound as full, but if you also split bridge to slug, you'll get maximum quack from the middle position.
Some people like to split bridge to slug because it's a little fuller and adds a little more quack to the middle position. It will also be hum cancelling in the middle position.
Others like to split bridge to screw for a sharper sound. It's more scooped like a Tele in the middle position. (Stock PRS wiring)
many many options "mind boggling" to say the least! I really can't get my head around all those options! I wonder if you could spare the time to amend the above image and re-organsie the coding, so that both pickups are split to screw/and vice-versa (slugs)? I could make a token payment if necessary?
NB: thank god I'm not looking for Jimmy Page 4 push/pull operation! (LOL).
Many thanks!
take care.
Last edited: