Wiring

Discussion in 'Electric Instruments' started by carpincowboy, Dec 29, 2015.

  1. carpincowboy

    carpincowboy New Member

    Joined:
    Jan 13, 2013
    Messages:
    449
    Likes Received:
    0
    I've rewired my se cu 24 with a super switch following the schematic as shown and the stock pickups but I'm not getting the tones I thought I would. Do I have to do a magnet swap? Any ideas please.

    [​IMG]
     
    #1 carpincowboy, Dec 29, 2015
    Last edited: Dec 29, 2015
  2. vchizzle

    vchizzle Zomb!e Nine, DFZ

    Joined:
    Apr 28, 2012
    Messages:
    7,084
    Likes Received:
    4,134
    You can try swapping the hot and the ground wires on one pickup I think.
     
  3. carpincowboy

    carpincowboy New Member

    Joined:
    Jan 13, 2013
    Messages:
    449
    Likes Received:
    0
    I'll give it a try. It does seem that the full humbucker sound isn't there.
     
  4. LSchefman

    LSchefman Hears Tones

    Joined:
    Apr 26, 2012
    Messages:
    24,701
    Likes Received:
    21,606
    Just curious, what was it that you expected from this switch that the stock switch wasn't giving you? I've never heard of the product, so I'm not pooh-poohing it, I'm asking.
     
  5. carpincowboy

    carpincowboy New Member

    Joined:
    Jan 13, 2013
    Messages:
    449
    Likes Received:
    0
    I was hoping for the Prs switching but all 5 positions just sound weaker than before I changed it from the stock 3 way switch.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice