Wiring 5708 3 cond. for DGT

[Neskier]

Hi all - I decided to swap out the DGT bridge pickup for a 5708. The DGTis single cond. with white wire for splitting. The 5708 is 3 cond. (white, black, red, ground), I’d like to be able to split the 5708. Am I thinking about this correctly?

Black > bridge volume pot
White > same lug on tone pot as DGT
Red/braded > to ground

The DGT is currently wired : braded to volume pot(brade to ground) and white to tone pot middle lug.

Thanks!

 

[JasonE]

For the 57/08 - Black is hot, White is ground, Red is the coil tap. If it is out of phase this way, swap the black and white wires. For the bridge position it should be black to hot and white to ground.

 

[Steves355]

the neck. It was almost perfect. Not a fan of the 11's though. Went to 10. No a fan of the reversed volumes either. Didn't even know who grissom was lol. But it sounds great. I even measured the neck and based my Anderson build on it. 5 /8 neck, similar thickness