Tremolo Bar on my Core Tremonti

[Bluzen]

Proud owner of a 2019 Core Tremonti with a tremolo here. I have several other core models (Custom 24, P22) and never had a problem with the trem bars going into the bridge. In this case. I can't get the bar in into the bridge and don't want to force it. I see where there's the adjustment screw and the supplied tools don't appear to be the right size. Any clue to the size of the allen key for this is? I don't want to strip the screw out guessing which one I need. Can anyone offer up any information? Thanks!

 

[alantig]

It’s usually the smallest well-named-but-misspelled Allen wrench.

 

[Bluzen]

Appreciate the help. I ended up buying a full set of Allen wrenches. Hopefully I'll get this situated as I use a trem bar quite frequently.

 

[RickP]

From PRS site


What are the sizes of my guitar’s adjustment wrenches?
PRS Patented Trem Models (Private Stock/Core): Tremolo Arm Screw & Tremolo Saddle Screws = .050” hex wrench

All Models: Adjustable Stoptail Bridge Screws = 1/16” hex wrench

Molded PRS Patented Trem Models (CE (2016 – present), S2 Series, SE Series): Tremolo Arm, Saddles = 1.5 mm hex wrenchSE Series Models: Non-adjustable Stoptail Bridge Screws = 1.5 mm hex wrench

https://www.prsguitars.com/index.ph...e_the_sizes_of_my_guitars_adjustment_wrenches

 

[Bluzen]

From PRS site


What are the sizes of my guitar’s adjustment wrenches?
PRS Patented Trem Models (Private Stock/Core): Tremolo Arm Screw & Tremolo Saddle Screws = .050” hex wrench

All Models: Adjustable Stoptail Bridge Screws = 1/16” hex wrench

Molded PRS Patented Trem Models (CE (2016 – present), S2 Series, SE Series): Tremolo Arm, Saddles = 1.5 mm hex wrenchSE Series Models: Non-adjustable Stoptail Bridge Screws = 1.5 mm hex wrench

https://www.prsguitars.com/index.ph...e_the_sizes_of_my_guitars_adjustment_wrenches

RickP,

This is perfect. Thanks!