Treble bleed on McCarty

[gush]

Like the title says, I want to try treble bleed on my McCarty. It has push pulls on both volume and tone pots.

I thought I'd just mimic the circuit that's on my cu24 but it's a little different.

If I'm reading it correctly the value on the cu24 looks like 181 and its soldered to the tabs that are wired to switch and tone pot.

Does that sound correct?

Thanks in advance

 

[garrett]

You're on the right track. The 181 on the cap indicates a value of 180 picofarads, which is the value preferred by PRS. You wire it across the left (input) and center (output) lugs of the volume pot, as viewed from the back of the guitar.

 

[gush]

You're on the right track. The 181 on the cap indicates a value of 180 picofarads, which is the value preferred by PRS. You wire it across the left (input) and center (output) lugs of the volume pot, as viewed from the back of the guitar.

Thanks a million. I had a 181 cap in my parts drawer so as soon as my iron heats up its going on. Then plug it in.

 

[RadioRadio]

How does it sound?