Tone Pros AVT2P on Zach Myers SE

[XXXJAYXXX]

Hey all.. I recently bought a Zach Meyers SE and wanted to upgrade the bridge to a tonepros AVT2-P.. It said this was meant for PRS guitars.. but must be for US made models.. not the SE. The problem is the bushings are too small for the existing holes.. and the new pins do not have the same thread pitch, so won't thread in to the existing bushings.. Just wondering if anyone has run into this problem.. and if they have found a solution? My thought was to find a set of bushings the correct size/thread pitch.. but I have no idea where to even start looking for something like that..

Thanks in advance!

 

[FatFingerBlues]

Welcome to the forum!

The difference between the SE line and the core line bridges are the threads
The threads are metric on the SE line and standard on the US line
The bridges are the same
Either order yourself a set of studs for your SE or reuse the old ones
The bridge will work fine with the correct studs

 

[XXXJAYXXX]

Welcome to the forum!

The difference between the SE line and the core line bridges are the threads
The threads are metric on the SE line and standard on the US line
The bridges are the same
Either order yourself a set of studs for your SE or reuse the old ones
The bridge will work fine with the correct studs

The main thing I wanted to change was the studs... The Tonepros studs have a locking nut that holds them in place so they can't shift when changing strings or doing maintenance on the guitar...

 

[FatFingerBlues]

Then you will have to buy the Tonepros metric studs

https://tonepros.com/product/msprs/