Swapping SE Custom 24 Pickups for Seymour Duncan

[Matthew Shaw]

I am swapping out the SE Custom 24 85/15 "s" pickups for a set of Seymour Duncan JB and Jazz pickups. I have googled but cannot find a straightforward schematic for wiring the new SD pickups onto the SE Custom 24 electronics. Can someone please provide me with a link to this?

 

[bodia]

You're better off getting the wiring diagram off of the SD website. PRS pickup wire color schemes aren't always the same as pickup makers.

 

[Matthew Shaw]

You're better off getting the wiring diagram off of the SD website. PRS pickup wire color schemes aren't always the same as pickup makers.

Thats why I am asking here. I know others have done this swap and would like info from them

 

[bodia]

Thats why I am asking here. I know others have done this swap and would like info from them

Check this thread

 

[Matthew Shaw]

Check this thread

What thread?

 

[bodia]

What thread?

My bad. This one…

PRS Wiring Mods Resource Thread

Creating this as a central reference for those wanting to modify the wiring on their PRS guitars. I will post the diagrams I've created and/or shared in various threads over the last few years. All other legitimate mods are welcome from anyone! Disclaimer: I'm just some rando on the...

forums.prsguitars.com

 

[theDeepender]

I am swapping out the SE Custom 24 85/15 "s" pickups for a set of Seymour Duncan JB and Jazz pickups. I have googled but cannot find a straightforward schematic for wiring the new SD pickups onto the SE Custom 24 electronics. Can someone please provide me with a link to this?

I made a similar swap on my SE Custom 24. I used a ‘59 at the neck and a Custom at the bridge. I also used two push/pull switches for individual coil splitting. The pups have to be 4 wire instead of 2 wire for the splits. I used this one.

https://flic.kr/p/2o8uBD3

The Seymore Duncan wiring diagrams are here.

 

[theDeepender]

You're better off getting the wiring diagram off of the SD website. PRS pickup wire color schemes aren't always the same as pickup makers.

Yup.

 

[SinSir]

You're better off getting the wiring diagram off of the SD website. PRS pickup wire color schemes aren't always the same as pickup makers.

This ^ I did the same swap a while back, and I used the SD diagrams.