Specs by serial number?

CivoLee

New Member
Joined
Nov 17, 2022
Messages
69
I've got a 1992 Standard 24. The neck feels narrower at the nut than the SE Standard 24 I had, but not much thicker, and it gets noticeably wider toward the body. I thought it was a regular neck, but maybe it's a Wide Thin? I don't have a lot of hands-on experience with PRS at this point.

Is there somewhere I could punch in the serial number and pull up a list of specifications for that particular guitar?
 
You can ask the customer service but I don’t think they’ll have details for a guitar that goes so far back.
 
I've got a 1992 Standard 24. The neck feels narrower at the nut than the SE Standard 24 I had, but not much thicker, and it gets noticeably wider toward the body. I thought it was a regular neck, but maybe it's a Wide Thin? I don't have a lot of hands-on experience with PRS at this point.

Is there somewhere I could punch in the serial number and pull up a list of specifications for that particular guitar?

You can run the MODCAT through one of the interpreters. That may tell you what you need to know. According to Dave Burrluck's PRS Guitar Book, that should be a regular. But keep in mind that hand finishing can make it a little narrower than spec.
 
Back
Top