FunkyFreeman
Moo Panuwat
I tried putting on a Graphtech Black Tusq XL nut on my Paul Reed Smith SE SVN. The nut is compatible with Schecter 7 string guitars. I sanded it's buttom a bit just to let it fit the corner of fretboard end without filing nut slots.
Once I string the guitar with a 9 set, I found that the nut is not heigh enough and causes open 4th - 6th strings to heavily buzz. But fretting sound normal and clear on all registers through the board.
I tried raising the 4 - 6th saddles but that didn't help much. So this nut is simply not useable on my guitar. I'm looking at another Tusq nur 7 nut with Carvin compatibility which is heigher that Schecter variant. But still not sure it would fit.
So, any SE SVN owners replaced the nut? Which one did you use?
Once I string the guitar with a 9 set, I found that the nut is not heigh enough and causes open 4th - 6th strings to heavily buzz. But fretting sound normal and clear on all registers through the board.
I tried raising the 4 - 6th saddles but that didn't help much. So this nut is simply not useable on my guitar. I'm looking at another Tusq nur 7 nut with Carvin compatibility which is heigher that Schecter variant. But still not sure it would fit.
So, any SE SVN owners replaced the nut? Which one did you use?
