removing tone pot from current rotary diagram help

[MarioMartino]

Hi guys,

I´m looking forwards to remove the pot from the circuit but just to be shure. what wires i must cut (desolder)?

here is the diagram-> the ´Current section´

Thanks for the help.
Regards.

 

[aphantomvaper]

Good luck! Disconnection of the Tone red wire in pre-2007 or the .22 cap in Current will remove the tone pot from the circuit. The ground wires could be left alone.

 

[MarioMartino]

Good luck! Disconnection of the Tone red wire in pre-2007 or the .22 cap in Current will remove the tone pot from the circuit. The ground wires could be left alone.

Thanks a lot. I'll try it.
Best