hello everyone. So i decided to make my Mira into a three pickup guitar by wiring a p90 in the middle that has its own push/push volume pot that goes direct to output (and is set up through the push/push to bypass). I have a varitone wired into the hot output of the guitar so the pickups will pass through it on the way out of the guitar or be bypassed through a minitoggle. Was curious if I would be able to change the on/off minitoggle for bypass into an on/on/on so I could wire the hot from the p90 into it as an option and would the sketch I uploaded to that imgur link do the job? If both hot outputs get wired into the outer lugs on the 3way switch, will engaging either side of the switch send the humbuckers or p90s through the switch without interrupting the signal of the other? Like if I were to click the minitoggle down to send the p90 through it would it shut down the other wiring circuit or would it be allowed to pass back out on the way to the output? Any help would be appreciated
Last edited:
