MT15 FX Loop

[Ajaz]

Hi, does anyone know that if i pass my signal through the fx loop (return) of mt 15, does the signal goes through 6L6 tubes before reaching cabinet.

I intend to use this signal chain with my multi-fx floor board. Nothing goes through front input.

 

[LedHendriani]

Yes it does

 

[shinksma]

Yes, that is the whole point of that loop: Add effects after "gain" and EQ, prior to actual amplification from signal level to speaker level.

Also, this post belongs in the Amp section. Maybe ask a mod to move it? Plenty of info in that subforum for you.

 

[Ajaz]

Yes, that is the whole point of that loop: Add effects after "gain" and EQ, prior to actual amplification from signal level to speaker level.

Also, this post belongs in the Amp section. Maybe ask a mod to move it? Plenty of info in that subforum for you.

Thank you. The reason I asked because the master volume does not seems to work when I use FX return only with my foot pedals. On other amps, that I have, the master volume still works on FX loop.