Mira pickup wiring

Tom Cuskey

New Member
Joined
Mar 24, 2019
Messages
1
i have a 2007 Mira, purchased used with a Dimarzio 4 conductor pickup in the bridge. Don’t like it. Recently found a 2008 bridge pickup to replace it but it, like the original installed neck pickup is s 3 conductor. Can’t find a wiring diagram with a coil split toggle to get it done right. All help appreciated!
 

88prs

OCD for PRS
Joined
Jan 19, 2013
Messages
255
3 Conductor means there is a coil split wire that you can ground or go to positive depending on which coil you want tapped. Use a multi-meter set to Ohms and start trying combinations, 2 of the combinations will be around 4K ohms and 1 combination will be 8+K Ohms - that is the full humbucker. If it's a PRS original PUP the white wire is the center tap.
 
Top