IN need if wiring help

[GuitarPlAyEr84]

hi i have a SE 24 custom with a vol & tone pot & 2 T80-T toggle switch's with 57 08 TM pickups that was brought to me to install the 57 08 TM

 

[alantig]

Is there a three-way switch as well? This sounds like the 24-08 setup, which would be master volume, master tone, three-way pickup selector, and toggle switches for each pickup to coil tap. That should be the PDF on this page: https://support.prsguitars.com/hc/en-us/articles/10785489471515-SE-Custom-24-08-Wiring-Diagram.

This page is a level up from that and has links to other wiring diagrams. https://support.prsguitars.com/hc/e...55739-Wiring-Drawings-and-Technical-Documents

You'd be looking for the 24-08 setups under any of the categories. The trickiest part of wiring PRS pickups is usually the wire colors - they don't always follow the usual conventions.

Hope this helps! Good luck - and definitely feel free to keep hitting here w/questions if you run into difficulty. There are some gurus here.

 

[bodia]

You may want to check out this thread. At this point, it's kind of long. But, you should be able to find your answer here if the links @alantig posted didn't get you sorted out.

PRS Wiring Mods Resource Thread

Creating this as a central reference for those wanting to modify the wiring on their PRS guitars. I will post the diagrams I've created and/or shared in various threads over the last few years. All other legitimate mods are welcome from anyone! Disclaimer: I'm just some rando on the...

forums.prsguitars.com