Harker1440
New Member
I have a 2 Channel H head and 16 ohm 1x12 cab and i just picked up another vcab but its 8 ohm where do I set the impedence
8 ohm or 4 ohm when using both cabs?
8 ohm or 4 ohm when using both cabs?
Impedence Question
- Thread starter Harker1440
- Start date
docbennett
Banned
- Joined
- Apr 27, 2012
- Messages
- 1,496
You are going to have different amount of power being sent to the 2 different cabs. EM7 has explained this in detail on both this and the VR forum...I'd do a search for his posts.
docbennett
Banned
- Joined
- Apr 27, 2012
- Messages
- 1,496
And it appears as though he has already done so!!
http://www.vintagerocker.com/forum/showthread.html?17992-Amp-Impedence-Question&p=291421#post291421
http://www.vintagerocker.com/forum/showthread.html?17992-Amp-Impedence-Question&p=291421#post291421
zebraprs
New Member
- Joined
- Aug 24, 2012
- Messages
- 212
When you mix an 8ohm cab and 16ohm cab, the actual Impediance Load would be 5.3 Ohms. so if you had to do that i would set the switch to 4 Ohms... the best thing to do is try to swap your 8ohm speaker to someone who has a 16ohm version...
what type of speaker is it?
what type of speaker is it?
