I need the DGT mod to correct thin tone and volume drop!!!!

[Texsunburst59]

Does anyone have a copy or can lead me to the PDF of this mod.

Shawn sent me the link a while back, and now the link doesn't work.

I'm now going to get it done, and the original link Shawn sent me doesn't work.

Thanks in advance.

 

[Malloc]

What guitar?

 

[Simon Says]

Does anyone have a copy or can lead me to the PDF of this mod.

Shawn sent me the link a while back, and now the link doesn't work.

I'm now going to get it done, and the original link Shawn sent me doesn't work.

Thanks in advance.

https://prsguitars.com/support/schematics

 

[Simon Says]

Its not a mod, its stock current layout with resistors for partial splits. Originally DGT has had no resistors AFAIK - these ware added short time later

 

[Texsunburst59]

Its not a mod, its stock current layout with resistors for partial splits. Originally DGT has had no resistors AFAIK - these ware added short time later

I understand that, but I need the schematics to show exactly where the 2 resistors need to be installed.

Like I said , there was a link that Shawn had sent me a while back, that lead me to this site, and now the link doesn't work.

I found a few threads on different guitar forums with the same link Shawn gave me, and again none of them work now.

 

[Texsunburst59]

What guitar?

I should have mentioned, I have an '09 DGT, and my understanding is they do not have the resistors needed to correct the thin tones when in split mode and the volume drop.

These 2 issues are what I'm trying to fix.

Thanks again in advance for helping find the schematic that shows what resistors I need to install, and where they go.

 

[Texsunburst59]

https://prsguitars.com/support/schematics

Thanks SS.

It's 5 am, and I wasn't awake enough to see you sent me the link for the schematic.

This is what I needed.

Thanks A LOT.