HOLLOWBODY 594 CONSTRUCTION???

ViperDoc

Plugged In.
Joined
Nov 26, 2013
Messages
4,823
Location
The Flipside
I can assume, but does anyone know whether the Hollowbody 594 has the "bridge block" construction design similar to the H2 where the top and bottom wood connects under the bridge only via a bridge block? Thank you!
 
Here's one where you can see the hole under the bridge pup:

psf191-1000-28-jpg.7159
 
Here's one where you can see the hole under the bridge pup:

psf191-1000-28-jpg.7159
Thanks, what a great guitar! What i'm interested in is the wood underneath those bridge holes. I imagine there's a wood block underneath the bridge that connects to the back, but I can't see it. Does anyone have one of these to take a peak?
 
I would think it would be similar construction. Block of Hog between the top & back. Sadly don’t have photo proof to back this up.
 
You can see both a pot, the block, and the pickup wires through the f hole there.

I'm sure the block has to be there to support the bridge. The anchors run deep.
 
Back
Top