help with wiring a 5 way rotary switch

[prsdragon]

Ok I have question i"m putting in new pickups in my prs custom 24 but I don't know where the bare wires go they have a red white & black does the bare go to ground on the back of the volume pot please help prsdragon

 

[sergiodeblanc]

Did you get the PCB rotary or the wafer type?

 

[prsdragon]

I bought the PCB rotary

 

[garrettb]

The diagram is here: http://prsguitars.com/csc/schematics/schem08/custom5wayrotary.pdf

 

[prsdragon]

Cool thanks but do i have too change my tone push/pull switch to a regular tone switch? i wasnt sure but thanks for the diagram

 

[garrettb]

Cool thanks but do i have too change my tone push/pull switch to a regular tone switch? i wasnt sure but thanks for the diagram

No, you can leave it. The tone control will still work like usual, the push/pull switch just won't do anything.

 

[prsdragon]

Ok thanks do i need to unhook aney wires? if so do you know witch ones thanks prsdragon

 

[garrettb]

Well, you'll have to unhook the pickup wires from the push/pull to wire them to the rotary. Just follow the rotary diagram and ignore the push/pull and you should be fine.

 

[prsdragon]

Thank you for all your help prsdragon keep on rocken