Hi. I searched the forum, but did not see any posts about this. Anyone have experience with this product for light pick scratches / swirls? They provide two bottles, each bottle with a different polish type, and a micro-fiber cloth. Thanks.
Thank you for the great feedback you two. Where did you find Virtuoso, auto store? If I can't find that, I will order some of the eternashine with a better confidence level. THANK YOU! Kent
Hi guys, I'm new here to the forum & I do work at Eternashine (Guitar Scratch Remover Polish) and saw some posts here with questions.
Our product, the Player's Kit, is safe on PRS high gloss finishes, and we've had customers use it on the V12 finish with great success. If it's a high gloss PRS then you can use our polishes.
The product does not perform a chemical reaction or alter the surface as some may have thought, it actually works by smoothing out the scratches with each pass at the microscopic level, as you rub down the surface. This happens until the scratches are no longer visible. It is a special kind of compound but it works a little differently than the typical compounds you might find at your local hardware store & is thus safer to use on guitar finishes. It's been tested and is safe and effective when used as directed on guitars, and that includes high gloss nitro and poly finishes. Our product is not a glaze which will eventually wear off. Once you remove scratches with our Player's Kit, they won't come back because there is nothing to wear off. It is designed for lighter scratches primarily. We also currently offer detail sprays and spray wax, while those are not scratch removers they do make for a nice finished result after polishing.
Thanks to everyone for their interest in our products and feel free to contact us if there are questions.
I have been using massive amounts of eternashine's guitar scratch remover, not only for removing scratches on lacquer but also to polish frets (remove rust and tarnish).
I would say its a great product overall. It consistently removes scratches both light and deep.
The only caution I would advise is that if you're a perfectionist like me, you should standby another polish of ultra fine grit to use as a follow up to eternashine. I've found that on some finishes (some not all), eternashine does leave a slight haze. I use a very fine toothpaste (colgate sensitive teeth variety) to remove the haze leaving flawless shine. The toothpaste just one of those things I experimented with and found it a success. There is no way to predict which finishes end up with the haze and which do not.
So, did you end up getting the polish? I am interested in possibly picking some of this up.A buddy of mine used this stuff on an older used black CU24 he picked up locally. Here are the before and after pictures. I've been heavily thinking about picking it up to use on my CU24 as well.
![]()
![]()
On a side note, can anyone recommend some microfiber cloths? There has got to be a ton of stuff out there, but I would have no idea which ones are good or not.