Random Gecko
New Member
- Joined
- Jan 19, 2014
- Messages
- 33
I have a 2009 PRS DGT that doesn't have the resistors on the coil split circuit to bleed in a little of the other coil to add some fatness when they're split. I was thinking of doing it myself and seeing what happened but had a few questions about the wiring of it.
PRS' schematic states that they use a 2.2k resistor on the bridge and 1.1k resistor on the neck. Is it the higher the value the more of the other coil is let through or visa versa? For example, if I used a 3k resistor, would it let more of the coil through, or less?
Any help would be great. Thanks.
PRS' schematic states that they use a 2.2k resistor on the bridge and 1.1k resistor on the neck. Is it the higher the value the more of the other coil is let through or visa versa? For example, if I used a 3k resistor, would it let more of the coil through, or less?
Any help would be great. Thanks.