i just purchased #15 from the first run. (pictured on first page of thread)
its my first prs and first pro level guitar. and hopefully the last electric guitar i will ever need to buy!
im used to bigger heavier guitars, so i epoxyd 200g of lead sinkers to the back of the cavity cover (the spare one, not the one with the serial on it)
also replaced the pots with linear pushpulls, making it vol / vol with individual taps and no tone - stock prs vol pot has way too much taper for my low gain tones.
found the tap on bridge pickup was too quiet and trebly, so put a 2k resister inbetween the tap and ground, now its a usable tone.
having trouble intonating it tho - with eilxir .11's on, even with the grub screw removed the bass side is 5c flat at 12th fret.
treble side is fine...
oh, and i dont like the phase 2 tuners at all - the ratio is way too low.
***edit - not sure what changed, but now intonation is bang on. wicked
its my first prs and first pro level guitar. and hopefully the last electric guitar i will ever need to buy!
im used to bigger heavier guitars, so i epoxyd 200g of lead sinkers to the back of the cavity cover (the spare one, not the one with the serial on it)
also replaced the pots with linear pushpulls, making it vol / vol with individual taps and no tone - stock prs vol pot has way too much taper for my low gain tones.
found the tap on bridge pickup was too quiet and trebly, so put a 2k resister inbetween the tap and ground, now its a usable tone.
having trouble intonating it tho - with eilxir .11's on, even with the grub screw removed the bass side is 5c flat at 12th fret.
treble side is fine...
oh, and i dont like the phase 2 tuners at all - the ratio is way too low.
***edit - not sure what changed, but now intonation is bang on. wicked
Last edited: