Rod/
Vibrato & String Bender
As the title says…..can you buy them? Or does someone have em for sale?
Can you buy from PRS their newer wraparound bridge with the brass inserts? Don’t see it on their website..
- Thread starter Rod/
- Start date
Bowtiefanatc
Confirmed Bird Snob
Like this? Yes, I just got one from MusicZoo
Bowtiefanatc
Confirmed Bird Snob
RickP
Established 1960, Still Not Dead
Look here: https://us.prsaccessories.com/products/adjustable-stoptail-bridge-with-studs
Several also available on Reverb, and John Mann also has a great one.
Several also available on Reverb, and John Mann also has a great one.
Rod/
Vibrato & String Bender
Thank you all…. Didn’t see them on their website last night.. weird…
Going Modal
I should be practicing right now.
If you're talking about the one that Bowtiefanatc shared a picture of (non-adjustable saddles, but has the tiny brass inserts at the edge where the strings touch), then no you cannot buy them separately from PRS--only if you buy an actual Paul's Guitar (or other select limited-edition guitars that they've appeared on). You can occasionally find them on the used market, though, if somebody has taken one off their guitar and decides to sell it.
Now if you're talking about the adjustable-saddle wrap-around bridge (on which the adjustable saddles themselves are brass), then yes it's called the "adjustable stoptail bridge" and you can get 'em from the PRS Accessory store.
Now if you're talking about the adjustable-saddle wrap-around bridge (on which the adjustable saddles themselves are brass), then yes it's called the "adjustable stoptail bridge" and you can get 'em from the PRS Accessory store.
bodia
Authorities said.....best leave it.....unsolved
Yeah, but they did sell them outside of the PRS Store. I remember Shawn posting about it in some thread. Not sure if it was a limited quantity, or what, but he said they were available to purchase. I don't remember where I got mine, but I bought one and put it on my DC-22. It had to be late 2019 or early 2020. I got my Mira in December, 2019 and put the bridge from the DC-22 on it when I put the one with the brass inserts on the DC-22.
bodia
Authorities said.....best leave it.....unsolved
Had to dig a little bit, but I found it. Page two, post 36
forums.prsguitars.com
Paul's stoptail
OK. if the above philosophy is true, why isn't everyone putting brass nuts on their guitars? I had one on a mid 70's strat in the 80's, when brass nuts were all the rage. or for that matter, why aren't we making the stoptails themselves out of brass along with the tuners? In the mid '80s, Gibson...
forums.prsguitars.com
bodia
Authorities said.....best leave it.....unsolved
If we're talking about the one Bowtie pictured above, yes. I maybe a little more sustain. I just know I like the DC-22 with this bridge more than I did with the standard bridge.
Bowtiefanatc
Confirmed Bird Snob
To me it added a little extra clarity especially plugged in.
Rod/
Vibrato & String Bender
Thanks. It is now but It wasn’t a few days ago… weird…. At any rate I ended buying a Mann Made 2400 from John. No matter how much I cleaned the slots on the B and E string of the wrap tailpiece on my 93 Custom 22, they wouldn’t stop buzzing it was from hand corrosion…. And it wasn’t the nut or the frets….. neck relief was perfect…..been doing my own setups for many years.. I’m sure the new bridge will add new life to my old 22, which in general is a really nice, very well made Annapolis guitar
Rod/
Vibrato & String Bender
Glad to hear that…
bodia
Authorities said.....best leave it.....unsolved
Can’t go wrong with the MannMade!
shinksma
What? I get a title?
- Joined
- Mar 20, 2014
- Messages
- 5,424
Just to confirm:
At the time of writing (8:53am EDT, 5 May 2022), this product is available at the PRS accessories store. It is the Unplated Polished Aluminum non-adjustable stop tail, and the image shows brass inserts where the strings make contact:
us.prsaccessories.com
At the time of writing (8:53am EDT, 5 May 2022), this product is available at the PRS accessories store. It is the Unplated Polished Aluminum non-adjustable stop tail, and the image shows brass inserts where the strings make contact:
Stoptail Bridge with Studs – PRS Guitars West Street East Accessory Store
For use with PRS Stop tail models. Includes 2 matching brass studs (with un-plated threads) and intonation adjustment tool. (Stop tail bridge will fit SE-line, but studs will not) Note:Use a wide, flat object such as a large head slotted screwdriver to adjust the stud.
us.prsaccessories.com
Glenn Gross
Another Old Guy
Unpolished aluminum is now sold out.
Bowtiefanatc
Confirmed Bird Snob
Paul Reed Smith Wraparound Stoptail Bridge with Brass Inserts PRS Paul's Guitar | Reverb
wraparound bridge from PRS. got this from some trades payment. to honest, I'm not quite familiar with PRS stuffs, but I've seen this bridge used on Paul's Guitar models. looks to be high quality bridge (typical PRS stuffs). quite lightweight, seems to be made from aluminium. and the interesting p...
reverb.com
This one is used but a great deal. Holy cow. I just bought one from MusicZoo. Weird that they are super hard to find now.
Lewguitar
Old Know It All
I just ordered one and the order went through. Or seems to have. Thanks!Just to confirm:
At the time of writing (8:53am EDT, 5 May 2022), this product is available at the PRS accessories store. It is the Unplated Polished Aluminum non-adjustable stop tail, and the image shows brass inserts where the strings make contact:
Stoptail Bridge with Studs – PRS Guitars West Street East Accessory Store
For use with PRS Stop tail models. Includes 2 matching brass studs (with un-plated threads) and intonation adjustment tool. (Stop tail bridge will fit SE-line, but studs will not) Note:Use a wide, flat object such as a large head slotted screwdriver to adjust the stud.
Similar threads
