Advice: Want to replace rotary with 3 way push pull on CE24

[tildeslash]

How many push pull?
And is the push/pull doing splits or phase/etc???

Is there a wiring diagram for this or color coded for pickups?
Which 3 way toggle would work?

 

[toothace]

This might be your simplest option...



http://us.prsaccessories.com/collections/parts/products/3-way-push-pull-drop-in

 

[garrett]

Any three way toggle will do the trick. Check the support section of the PRS website for standard wiring diagrams. One push/pull for splits is the norm, but you do whatever you like.

Note that you will have to widen the hole a bit to accommodate the toggle switch. No big deal.

 

[Bowtiefanatc]

Do it, I swapped mine out and couldn't be happier. I even drilled the hole out, which isn't as bad as I thought it would be.

 

[wildman926]

If you drill, use blue painters tape to cover the hole and the area around the hole, to prevent chipping the clear.