2001 Standard 22 with tremonti pickups wiring help

Discussion in 'PTC - PRS Tech Center' started by adamjquinn, Jul 16, 2018.

  1. adamjquinn

    adamjquinn New Member

    Joined:
    Jul 16, 2018
    Messages:
    2
    Likes Received:
    0
    Hey all. I recently upgraded from a CE22 to a Standard 22 from 2001 and has tremonti pickups. I was having issues with the output jack so I soldered a new one with new braided to the volume pot lead and ground. I decided to clean up the old solder on the pots and start fresh as it was quite a sloppy job. However I have no volume control now and wondering how the guy had it wired as it appears to be the exaxt same. I checked everything with a multimeter and not getting a reading between the 1st 2 posts on the volume pot. None of the leads are grounded that shouldn't be either. I have a 5 way rotary switch. But now I noticed he used the pickup green wire to ground and the white/red/black to the 5 way switch. Are the red and green wires from the pickup supposed to be unused in this situation?
     
  2. adamjquinn

    adamjquinn New Member

    Joined:
    Jul 16, 2018
    Messages:
    2
    Likes Received:
    0
    Volume pot died but still getting feedback from the new jack. Anyone?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice