pot

The following is my PRS SE Silver Sky Strat Mod journey (thus far). I wanted to jump back into the SSS strat pool, so I tried the PRS SE Silver Sky as a cost-effective option. My main issues (and SOLUTIONS) were: Issue 1: There were high/uneven frets that wouldn’t allow the action to be...

I'm looking to do something odd to a CE 24. TLDR I'm looking for a stacked pot that will allow me to control volume and tone with a stacked knob, but still allow me to tap the coils with a push or pull. Long version. I've played Gibson style guitars most of my life, because of this I've...

Thought I would throw this one up here from another artist that I compose as. Artist is "King Kawhileiwhilei" and the track is "PakAloloha". In Hawaiian, Pakalolo translates to wacky tobacco, and aloha is hello, goodbye, spirit, love, etc. So I took those two words, put them in my mental vise...

The volume pot on my 2011 513 seems to have a loose shaft. Removing the lampshade knob and waggling it slightly I can feel the play. Tapping it also produces an audible mechanical ‘slap’ in the shaft. The control seems to be working fine but I find it annoying when I hear my hand make contact...

I have a 2019 Custom 24-08 and notice that all of the pots feel "sloppy" or loose. I've confirmed that the nuts are tight to the body and that the "slop" is between the pot shaft and the pot body. I would also say they feel a bit dry, as in the wiper and shaft is not lubricated well. Is this...

I'd like to add a kill pot to my PRS S2 custom. The tone pot doubles as a coil tap, but am I able to easily replace the volume pot with a kill pot? 500K? An alternative would be to drill a small button hole to the left of the volume (I'm assuming there's a cavity!) to short it out - I did this...

Hi everyone, I'm new to the forum and a new PRS owner. So, I won a S2 Mira 2014 on a contest and things have not been going great. The guitar had a grounding problem that I couldn't pin down, so I was trying to remove the knobs so I would have a bit more room for maneuvering. I used the...

Hello guys~ I have an old se santana 2001 And there's some noise on tone pot. Also there's no nob as you see on my profile pic. I'd like to change it to push-pull pot, but I'm not sure which pot should I use, since there are two types of nob and pot; inch or mm. And if you have done push pull...