cu22

  1. TubeStack

    NGD: 1997 CU22 (First PRS)

    Hello, new to the forum and PRS. :) I bought this ‘97 Custom 22 a week ago and love it! Semi-hollow with no F hole. It’s my first PRS, and it’s funny because it’s actually the first PRS I’ve ever played. Loved it and bought it almost immediately. Plays super well, feels and sounds...
  2. A

    Semi-Weird Question/Seeking Input: S2 594 vs Core CU22

    Hey there! So after having owned one twice, I've grown to realize that I really enjoy playing the S2 594. Between the Pattern Vintage neck and the forearm bezel of the S2 line, it's just a joy to play, and I feel like I've always played more "inspired" when I've had one. Of course, I wound up...
  3. P

    Was there ever a Core Custom 22 Semi-Hollow?

    Was there ever a Core Custom 22 Semi-Hollow? It seems like such a thing would have existed once upon a time, but I haven't turned up examples searching online. I prefer 22 frets, Wide Fat necks, and stop tails, and it looks like the only way to come close to that particular guitar in...
  4. danktat

    Some "GOOD" photos (CU22)

    Took Dottie (2007 CU22) outside with my real DSLR to get some pix that actually show her top off properly. Cell phone pix tend to do something like what could be equated to an amp "compressing" the sound of a guitar when it processes photos. This is just my camera, with the kit lens, outside...
  5. danktat

    Rehearsing again

    From last night's MASKED UP----SOCIALLY DISTANCED rehearsal. Fun Stuff. Gives a LITERAL meaning to the term "garage band"....lol It was a bit cold with the doors opened, but SAFETY first :)
  6. danktat

    Electric outdoors

    Noodling out behind the shop with Dottie, and the Blackstar practice amp. The weather is way too nice out here. Too bad I have an appointment coming in within the next half hour. I could stay out here all day. But I do have to stop embarrassing myself trying sing.....LOL. And yes, I do hold my...
  7. danktat

    CU22 (not new but pix)

    I haven't posted any pix of Dottie recently so I figured I would throw a few up. :D Thanks for looking :D
  8. C

    CU24 has tight fret spacing. Would CU22 solve the my problem?

    Dear PRS owners, I have a CE24 with pattern thin neck and I love it. I am planning to get a CU24. However, I am noticing a slight discomfort when I am sitting down with CE24 and accessing the higher frets 20+. When I am standing, my left hand can be angled perfectly perpendicular to the neck...
  9. danktat

    2007 Custom 22

    Bored at work so I took her outside for a pic. Thanks for looking.
  10. danktat

    Just another pic

    So, my pic addiction is taking over and even though I posted pix of this girl recently, I couldn't help myself. I feel like this was a good choice to get back on the horse. And the band is revving up to get this scratch demo started to push forward with an album. So, hopefully, I'll get to see...
  11. danktat

    NEW GITFIDDLE DAY for me!!!

    NGD FOR ME! Yes, it IS another custom 22 with 10 top. As some of you may know I ran into a financial situation recently that caused me to sell off a couple of guitars. So, I am rebuilding. This seemed like as good a place to start as any. LOL. I just contacted the PRS service department to have...
  12. pauloqs

    New wiring day: 5-way rotary to McCarty switching.

    I rewired my CU22 with 5-way rotary to a 3-way toggle with push/pull tone pot, McCarty switching style. I’m super happy with the results. Much easier than I expected. Also, thank you @gush for the clarification regarding the grounding of the pickups not displayed in the wiring diagrams. Here’s...
  13. pauloqs

    2x NGD: Custom 22 & S2 Mira

    Hard tail 2008 Custom 22 made in 2009 in royal blue with a Wide Thin neck, moon inlays and dragon II pickups. Super light weighing 7 lbs 1.3 oz. The finish has most certainly faded over time. I thing the original owner kept it on a stand instead of its case or gig bag. Plays great. Tuners are a...
  14. danktat

    CU22s outdoors

    Finally took these out and got shots with an actual camera instead of just a cell phone. Made a slight difference....lol. Taken on a bright, sunny day...but in the shade....no flash....with a Cannon T4i with the kit 18-55 lens. Thanks for looking.
  15. danktat

    NGD! Unboxing vid and pix

    Well, she's here! Here is the unboxing! And a few pix....Sorry about the photo quality. These are from my cell phone right after getting the package here in to work. I'll get better photos later. Thanks for looking. :D
  16. danktat

    Well, I done f***** up......

    I just dropped payment on this 2001 CU22. All stock except the truss rod cover. 10 top. "Excellent" condition. The deal was too good. I could have paid more for an S2 after negotiations were all done. This will officially be the least expensive PRS I have ever owned. That should take care of my...
  17. danktat

    Outdoor Photos

    Yes, this guitar again.....lol.....but I was bored so I went outside, with a real DSLR and a backdrop of dying ivy for a few photos. Wood grain and abalone look much better in natural light anyway ;) 2004 CU22 limited run Brazilian And a few booty shots..... Thanks for...
  18. danktat

    Random Top Shot

    I usually like a girl's top to be off. But this Brazilian girl is a 10 with her top on. (Only a PRS nerd will understand... lol) Hat is from my luthier at J Guitars. Got bored so I took a cell phone shot....just because.
  19. danktat

    Brazilian Girl (pix)

    Sometimes, there is no more beautiful a girl than a Brazilian. :-D I am sorry I don't have much of a variety of PRSs to post, but here is what I got. Hope you don't get bored seeing her. Thanks for looking.
  20. N

    Bridge height + neck relief tightness

    Hello all, I have two PRS, a CU24 and a CU22. Both with tremolo bridge, strung with 10-46s and tuned E-Standard. I bought both second hand/used. When I got the CU24 I got used to a stiffer string tension and didn't really bother with the bridge height. I left it as I received it because the...
Back
Top