Search results

  1. Perry

    513 Pickups Swap?

    Just by way of update and a huge thank you to Maertl513 for helping me contact the right people, I received a replacement neck pickup (pricey, but not as costly as I anticipated), which I wired direct to the 5way superswitch. Excellent results with no unwanted noise. The neck pickup is now...
  2. Perry

    Shorter tremolo arm

    I’m going to try this. Does the tip unscrew or is it a press fit?
  3. Perry

    Neck Relief on PRS guitars

    You’ve answered your own question Justin. No neck relief is great for shredders and legato playing. For the rest of us, we like to hear notes ring out clear with a nice bloom on longer notes. I set my relief by eye, holding the D string down at the first fret and the fret where the neck meets...
  4. Perry

    513 Pickups Swap?

    Yes, mine is a 2011 and has the pcb in the cavity like yours. My problem is not so much the wiring, but the neck pickup itself, which has an intermittent break/connection. Ideally, and cost permitting, I would like to purchase a new neck pickup from PRS. I have emailed PTC Europe nearly 3...
  5. Perry

    513 Pickups Swap?

    Ok, I’ve emailed PTC Europe here in the UK to enquire about either a pickup repair or purchasing a new replacement. If neither is possible then us 513 owners are basically screwed if our pickups fail as the sculptured pickup cavities don’t look as if they can accommodate any after market brand...
  6. Perry

    513 Pickups Swap?

    Hey, thanks everyone. I will contact PTC here in the UK.
  7. Perry

    513 Pickups Swap?

    I’m fast falling out of love with the pickups in my 513. At home volumes the guitar sounds perfect, but playing live, the neck pickup in particular seems to take on a life of its own, becoming microphonic in behaviour. My Custom 24 in the same situations has no such problem. I have checked...
  8. Perry

    509 pickups.

    I think I read in an earlier thread that 509 pups are not the same as the 513. I don’t recall the source giving a reason why not, though.
  9. Perry

    1999 HFS / Vintage Bass measurements

    I keep reading how the DC resistance is not a particularly useful measurement, though we continue to use it, mistakenly perhaps, to identify how 'hot' or 'strong' a pickup is likely to sound in a guitar. Outside the general consensus boundaries of 'the hotter the pickup, the more muddy it may...
  10. Perry

    Do PRS guitars require high action?

    Christian, not all PRS guitars can be set up by factory measurements alone. I set my action the same as you - 1.25 and 1.5mm respectively. I also have the truss rod set almost straight. I have 2 core PRS - a 2002 Custom 24 and a 2011 513. I also followed John Mann's video using a 2.4mm hex key...
  11. Perry

    Tremolo arm bush

    So, although my tremolo arm tension adjustment screw is screwed in fairly tight, I think that, after 10 years of whammy action, the black plastic bushing down inside the trem block is not gripping the arm sufficiently around its perimeter. If I screw the tension screw in any further, I cannot...
  12. Perry

    PRS 513 Pickups

    Ok, by way of follow up, I got a reply from Shawn at PTC who said it would be ok to try waxing the pickups. This I did (after much research on Youtube) and the results were successful. No more squeal on moderate to high overdriven sounds. The hardest bit was cleaning up the wax from the pcb...
  13. Perry

    PRS 513 Pickups

    Okay, thanks. I have emailed them.
  14. Perry

    PRS 513 Pickups

    Yeah, I’m the second owner. But thanks anyway.
  15. Perry

    PRS 513 Pickups

    Has anyone wax potted a set of microphonic 513 pickups? I’m assuming it’s not a problem if the attached pcb is wax dipped too?
  16. Perry

    PRS 513 Wiring Schematic?

    Does anyone have a PRS 513 wiring diagram they can post here please? A search for schematic links in other posts elsewhere lead to ‘page not found’ or similar. I’m hoping someone downloaded a PDF in the past that they can share. Background to this is I’m trouble-shooting a shrieking...
  17. Perry

    Removing 513 Pickups?

    Well, by way of an update, my 513 was back to its old trick again of squealing neck pickup on high-ish gain settings. Using my digimeter, I was just exploring everything was earthing correctly when I found that there was continuity between earth and the 2 single coil pickup mounting screws...
  18. Perry

    Removing 513 Pickups?

    Curses! This morning, the problem had returned and, after a day on the workbench, I think has finally been solved......I hope. So, by way of concluding this post, there were two faults with my 513 neck pickup, which not only caused it to be very microphonic, but also howl at higher volumes...
  19. Perry

    Removing 513 Pickups?

    Yes, PCB under each pickup and another PCB in the control cavity. Looks like I’ll go for a good electrical technician to repair the pickup board. Thanks for your input Shawn
  20. Perry

    Removing 513 Pickups?

    Close, but they don’t appear to be a technical centre from what I can see ☹️
Top