Search results

  1. Y

    Mcarty wiring question

    Hi, I just bought a used 2000 Mcarty with a Duncan bridge and a Dimarzio next pickup and I think something is off with the push pull. Shouldn’t the coil tap with the 3 way in the middle be hum free? I’m still hearing 60 cycle hum. Any help would be appreciated.
  2. Y

    MT15 and 5751 in V2

    Put it in V3.... much better. Replacing V2 made the amp muddy.
  3. Y

    Anyone running a Flanger in the MT-15 Loop?

    No volume on a Boss Flanger
  4. Y

    Anyone running a Flanger in the MT-15 Loop?

    I get a serious volume boost when i turn on my Boss BF-2 in the loop of the MT-15... this didn't happen on my Mesa.... anyone else seeing this? If not, what Flanger are you using? Thanks
  5. Y

    What type of FX loop does the MT-15 have?

    Update I've messed around with my setup on the weekend and i can isolate it to the Flanger. For some reason the loop doesn't agree with it so i might need to run it out front or look at another brand.
  6. Y

    What type of FX loop does the MT-15 have?

    These pedals worked fine with Marshall, Mesa and Orange amps.... somethings off with the FX loop on the MT-15. Is it Parallel or serial?
  7. Y

    What type of FX loop does the MT-15 have?

    I get a huge volume jump when using my Boss BF-2 flanger in the loop and i'm thinking the loop might be line level? If so, this is disappointing... most people are using pedals these days and the amp should have been built around that.
  8. Y

    Tube Layout Chart for MT15?

    The one i replaced was the 4-5 gain stage for the lead as per Shawn's drawing...it should be V3.
  9. Y

    Tube Layout Chart for MT15?

    Replacing V3 with a 12AT7X does miracles for this amp.... smooths the gain out and helps with the taper. In V2 it was too muddy but V3 was perfect!
  10. Y

    Tube Layout Chart for MT15?

    So if I replace V2 & V3 with a 5751 I should see a good reduction in gain?
  11. Y

    What amp do you play your CE 24 through?

    Mesa F-50, Marshall JVM1H Head, Orange TT
  12. Y

    Questions about replacement nut from PRS Store.

    Thanks guys... i'll bring it to my tech.
  13. Y

    Questions about replacement nut from PRS Store.

    Hi, Does anyone know the gauge of string the slots are pre-cut too? Also, do you think the slots are deep enough that you could just remove material from the bottom of the nut to adjust height? Thanks
  14. Y

    Mcarty Wiring Question

    No, i'm fine with the hum.... i'm using Duncan's as well so 4 conductor is there.
  15. Y

    Mcarty Wiring Question

    Hi Guys, I just wired up my CE22 with this wiring and i'm hearing 60 cycle hum when i split the humbuckers....is this normal? I'm pretty sure it's normal but i wanted to be sure., Thanks
  16. Y

    Remember when we used to get excited about PRS sightings?

    One of The Tragically Hip guitarists used an old CE in their final concert last Saturday on CBC. The singer has brain Cancer and it was possibly their last show ever.... 11 Million Canadians tuned in.
  17. Y

    Tremolo bar issue

    Thanks, i like this idea!
  18. Y

    Tremolo bar issue

    Hi, I like the bar just snug enough so it doesn't swing freely when i play and i don't like it pushed all the way down the plastic sleeve so it has more height when i use it.... i find as i play the bar pushes down deeper in the sleeve and i'm left with no room to maneuver. Does anyone else...
  19. Y

    Vintage yellow.

    I love that color...but not with the red back. My favorite is with the natural Mahogany back.
  20. Y

    Dragon 2 Pickup Question

    I usually try to go for an old VH type tone... not too bright and not muddy. My biggest fear would be that the Dragons would be muddy. I've been thinking about the 59/Custom hybrid but a new one will cost me the same as the Dragon 2 set.
Top