Search results

  1. Artjr

    NGD - SE Zach Myers

    thanks, I got them on amazon...
  2. Artjr

    NGD - SE Zach Myers

    Just got mine today, also got the cream pickup rings. Tuners will be here monday, but I forgot to order that damn switch knob. Out of box the action was a little high. Slight turn of truss rod and its perfect.
  3. Artjr

    What stop tail is this?

    Thanks Garrett, I ended up getting it down the small amount I needed to. It’s very close to the pickguard, but clears. The main issue was debris inside the post stud inserts. I just blew them out with compressed air and the post where able to drop another full turn. Only needed a half though. I...
  4. Artjr

    What stop tail is this?

    Thanks for emailing me Shawn. Big help and interesting info about the 2007 Mira
  5. Artjr

    What stop tail is this?

    Do I need to find a standard stop tail. I tried getting the setup correct and the stop tail bottoms on the pickguard and bass side need to go down another 3/64th but stud stops turning about 3/16th before hitting body. . Guitar is a 2007 Mira
  6. Artjr

    Looking for Rosewood truss rod cover

    Yes that’s the guy. I have a set of pickup rings from him. Finally have a guitar to use them on. Does anyone know what bridge that is. It bottoms out before I can get the action perfect. I need about 2/64th lower
  7. Artjr

    Looking for Rosewood truss rod cover

    Well, it’s eBay then.
  8. Artjr

    Looking for Rosewood truss rod cover

    Where’s a good place to get one? Is a core Mira the same as any other core when it comes to truss rod cover? Thanks
  9. Artjr

    MT15 TOAN

    I just added a 12AU7 to V2 and love the gain channel now, not as muddy and more control now.I played around with V2 and V3 tubes . It really makes a difference. I tried changing V3 and V2 both to AU7s and it really tamed the gain too much for me. I read a lot of people are using 5881 or 12ax7 in...
  10. Artjr

    Sonzera 20 vs Custom 20

    Just got a Sonera 20 last week, cleans are great and take pedals really good. The drive channel is worthless to me. Has any one played with preamp tube or speaker to try and tighten up the drive channel?
  11. Artjr

    Can anything be done to stop this.

    Thanks, I will try that. I was hoping PTC would have a solution. Never got a reply about the pictures I emailed last Monday. Any other time, I had a reply the same day or next day. That’s why I was asking if someone was on vacation.
  12. Artjr

    Can anything be done to stop this.

    Crickets, is someone there on vacation this week
  13. Artjr

    Can anything be done to stop this.

    Ok. Thank you.
  14. Artjr

    Can anything be done to stop this.

    i have a 07 CU22 and I noticed some of the clear on the edges of the fretboard is flaking off. It’s small areas in different places.
  15. Artjr

    NGD - Blue Guitar Day! Paul's Guitar, Faded Blue Jean Quilt WOW

    Totally gorgeous. Love the white pickup rings on blue. The whole guitar it awesome.
  16. Artjr

    early version CE24 10 tops?

    When I overlapped the body’s my CE24 with a CE22 the bridge on the 24 is forward about 3/8” that’s a rough guess but it’s definitely forward. So I have concluded that it is a 24 body. Btw CEs 25” scale just like CUs
  17. Artjr

    early version CE24 10 tops?

    I need to buy something and get this off my mind. I’ll drive myself nuts.
  18. Artjr

    early version CE24 10 tops?

    i have gone as far as scaling and overlaying the photos with another CE24. From the 24th fret to the bridge everything matches up. except the bridge pickup the bridge pickup in set back maybe 1/4”. That 1/4” looks like a mile just looking at the guitar.
  19. Artjr

    early version CE24 10 tops?

    Heck with the 10 top part. It’s turned into , is this a 24 neck on a 22 body. To me it looks like that bridge pickup is closer to the bridge than most 24s.
Top