Search results

  1. claythomas

    Stoptail Bridges: Adjustable vs. Non-Adjustabe?

    I only have one guitar with a fixed bridge. My Tim Mahoney SE Custom 24. After getting it at such a deal I decided to upgrade all available parts with US made units. So, I got the Mann version of the adjustable bridge. At first I didn't like it because it changed the angle and feel of the...
  2. claythomas

    Need a new wireless...

    Yeah, I'm trying to keep everything mounted on my pedal board. The idea of a little antennae sticking up triggers me....
  3. claythomas

    Need a new wireless...

    Better hold on to it. That one is discontinued...
  4. claythomas

    Need a new wireless...

    Great !! I'm looking at those now. I also, can't use the new versions that look like little foldable units. Too fragile on my stages, I have seen others get snapped right off and then you have a problem.
  5. claythomas

    Need a new wireless...

    My Audio Technica digital wireless is starting to glitch out after 11 years of faithful no hassle service. So embarrassing and I'm too active to use a cable. I have contacted AT support but they don't really offer a solution. I have used the Shure FM model with good performance and have tried a...
  6. claythomas

    PRS Wiring Mods Resource Thread

    I have a request....is there a way to wire a 5 way rotary (PCB) with a Tremonti in the bridge and a Vintage Bass in the neck and each pickup having a separate volume? Assuming the tone pot would become a volume for the Vintage Bass.
  7. claythomas

    How do I get the MT-15 in stereo?

    Yes, without using the same amps, you will have to experiment and set levels as needed.
  8. claythomas

    Thoughts about how to raise my cab/head.

    Thanks for the suggestions, guys. I play mostly small bar gigs and sometimes a larger venue. Looking for something portable. Gonna check out that wooden bracket deal. It looks cool.
  9. claythomas

    Thoughts about how to raise my cab/head.

    It seems I can't scale down without losing something.....just sold my Mesa 4x12's. Bought a PRS MT 12 cab for my MT-15 head. Now I'm realizing after a rehearsal that I need to raise the cab. I just can't hear it as well in the floor. I've looked at combo amp stands but they all seem to only tilt...
  10. claythomas

    Rotary nut size?

    That's totally fair.
  11. claythomas

    Mistakenly bought low mass tuners......

    I am installing them on an 88 CE24.
  12. claythomas

    Rotary nut size?

    I bought a drop in prewired 5 way rotary-volume-tone assembly from Reverb and it was missing the rotary nut/washer. Any idea what size it is?
  13. claythomas

    How do I get the MT-15 in stereo?

    Yes, unless you get another cab for the middle-mono output.
  14. claythomas

    How do I get the MT-15 in stereo?

    Hi Bizarre, The only way to get stereo is to either buy another mt-15 or buy a stereo power amp and run into your mt-15 and then send a stereo signal from your effects to each input of the amp. Of course you would need a dummy load for the mt-15. And true stereo requires a wet-Left-mono...
  15. claythomas

    Mistakenly bought low mass tuners......

    Thanks guys. I felt this was going to be the popular consensus. I just needed to hear it from someone else.
  16. claythomas

    Gen II Tuners on a 89 CE24.

    The area where the headstock begins. Typically at the top of the nut.
  17. claythomas

    Mistakenly bought low mass tuners......

    I bought a set of low mass tuners that were advertised as GEN II. The low mass tuners don't have screws but rather have an alignment pin. The Reverb seller has good numbers and reputation. But if he had advertised these correctly I surely wouldn't have bought them. Anyway, I asked him for a...
  18. claythomas

    Gen II Tuners on a 89 CE24.

    Ok, here's my dilemma....I have a few older CE24's from the 80's and early 90's. I want to replace the tired tuners with GEN II. It appears the screwholes won't line up and the screws are longer than the thickness of the headstock at the volute. I can live with the existing screwholes showing as...
  19. claythomas

    MT-15 Cab cover

    Thanks!! That one was sold very quickly! I did get a used one from John Mann!!
Top