Recent content by TLOPband

Awesome thanks so much!

Hello all. I've got a Mira that I put a minihumbucker in the middle position and switched to a 5 way switch. I have each pickup wired to a mini toggle to do coil splitting but l'm swapping that out for three slider switches (as in a Jaguar style switch setup) to do the coil splitting instead. I...

I have a bit of a unique situation and I'd like some feedback. I bought a Solo Guitar double neck kit that has a telecaster setup but the second neck is a mandolin. Both necks have a telecaster pickup but I'm going to put a minihumbucker for the guitar neck so I can do coil splitting. Of course...

One last update on the "FrankenMira" I built my own pickguard to include the Varitone and its bypass, then completely rewired the entire guitar and swapped the p90 for a minihumbucker in the middle. So each minitoggle on the right hand side splits the corresponding pickup, the minitoggle below...

Both humbuckers are hooked to three way minitoggles for split/series/parallel, switch to turn on bridge and neck together or all three pickups in position 2, then it all goes through a five tone varitone with a bypass toggle switch. I forgot how many tones it does lol.Thanks for the comment

Hello everyone. Was hoping I could get a bit of guidance for a mod I did on my PRS Mira. It was originally a two humbucker guitar but I put in a p90 in the middle position and changed the 3 way blade switch for a 5 way. I did a mod on my PRS Swamp Ash Special that uses an additional push pull...

Yes I switched a wire this afternoon and it works the way I want it to. Thanks for the replies!

Hey there! Here's the switch I bought (except I got the white one) Latching Push Button Switch, 16mm 12V LED Latching ON/Off Power Push Button Switch, 1 Pack Power Symbol+Ring LED Stainless Steel Waterproof (Green) https://a.co/d/bqxJlnN I have a PRS Swamp Ash Special that I modded this way...

Hey everyone. Soooo here's what I did. Changed my Mira from an H-H with a 3 way blade switch to an H-P90‐H with a 5 way blade switch. Then I decided to wire in a switch that would engage the bridge pickup regardless of what position the blade switch was in so I could get the bridge and neck...

Update on the Mira. Restained it and added a p90. 3 way blade switch + two 3 way minitoggles for split/series/parallel + 8 way varitone with a bypass switch + p90 with independent volume and push/push bypass to dail in whenever should equal 182 tones if I did the math right

Thanks for the link!

.

Sorry they're G&B pickups that came in the S2 Mira. All the posts I've seen online say the red and white are for coil splitting but it was the green and white that was attached to the push pull switch terminals

Im installing a dpdt switch in my S2 Mira for each pickup to get series/parallel/split. From taking the north finish and south finish off the push pull pot I know they're white and green, but does anyone know which is which?

Any suggestions for noiseless or hum canceling? I've seen some that will hum cancel when paired with another p90 but this guitar has the humbucker in the bridge. Would that combo hum cancel too since the humbucker does that anyway?