can anyone figure out the north/south - start/finish from this diagram?
I know the green & red are a pair, and the white & black are also a pair. I suspect the red/green pair are the south screw, and the black/white pair are the north slug. "BUT!" can't determine which is the positive, and...
my pickups:
reply from guitarelectronics:
"If you have standard 4 wire humbuckers, the coil split will cut both humbuckers in to single coils and can be selected individually rt together with the pickup selector. The diagram has been downloaded and used thousands of time over the past...
B.T.W. ...these are G&B SP85/15 BNU-Z + SP85/15 TNU-Z pickups. I can't actually see an "S" printed on them anywhere though! Is it possible that they could be designated "S" even though it's not printed on them (back or front). I pulled them out (again) and tested them on a multimeter, with the...
@garrett
Hey, either the guitarelectronics diagram is wrong or the colour coding of the pickup wires is wrong OR both? Problem is; I am not getting anything from the neck pickup and it sounds like single coil and phase reverse. split switch acting like kill switch and phase switch not making...
@garrett
thanks for invaluable info. mate!
One last request please as I know and appreciate that you are busy with 'other things' at the moment.
Please carefully check over this latest diagram (that I have 'settled' on for my current build). i.e. no errors anywhere?
I have removed the bridge...
many many options "mind boggling" to say the least! I really can't get my head around all those options! I wonder if you could spare the time to amend the above image and re-organsie the coding, so that both pickups are split to screw/and vice-versa (slugs)? I could make a token payment if...
Please study these two diagrams carefully, thanks:
The first is with your (Garrett's) colour code interpretation straight on to the guitarelectronics diagram.
The second is using the factory PRS colour coding as it is on the current wiring loom (from the pickups) and then applied to the...
Just a bit concerned because in factory spec. it is the white/green that are joined for the coil split (see image), but in the 'Garretts'/GuitarElectronics image it is the black/green that are joined for the coil split! Is that possible!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.