Rider1260's latest activity
-
Picked up a DC3 the other day and absolutely love it! Was looking for a bolt-on w/single coils and just couldn't bond with the Silver... -
Rider1260 replied to the thread Knocking Down the Finish....Before you sand the neck , try a bit of lotion , dry or sweaty hands are sticky.
-
Rider1260 replied to the thread Soldering Iron recommendations.Does you weller just have 1-10 numbers ??? and what size tip were you using when you "cooked" a Volume pot. if your just has numbers run...
-
I have to say small iron ( lower wattage ) amps are growing on me. Here is the revamped amp shelfs :) The HDRX20 is a stellar place to...
-
Rider1260 replied to the thread Modern Eagle Pickup Question.Hmmm My ME II had Modern Eagle pickups , and was told by a few folks that they were a precursor to the 57/08 but they were much lower...
-
Rider1260 replied to the thread Oops... So I got rid of my Forum Brian's run 509.....Congrats !!!! The truly original PRS ( 408 , 513, 509 , NF3 , NF53 ) pickup wise have always interested me a ton
-
Rider1260 replied to the thread Incoming 2024 Vela!.Well let us know how it sounds I am torn between the satin or "shiny" new Velas
-
Morning all, having been yearning for another Vela since letting go of mine awhile back, I contacted Sweetwater yesterday and they had...
-
Rider1260 replied to the thread Soldering Iron recommendations.Get this one you will thank me later :) 600-700 degrees is a real sweet spot for fast , safe soldering. Melting the solder fast is...
-
Rider1260 replied to the thread S2 gets Core Pickups and Electronics.I'm wanting the New Semi Hollow Vela with the Narrowfield :) wallet feeling lighter already if they had a gold one it would be on order...
-
Rider1260 replied to the thread Impossible to get covers of PRS pickups.New :) non lead based solder is MUCH harder to remove. you need a really hot iron and then add new solder to get the melting started...
-
Rider1260 replied to the thread Guitar stands/hangers: rubber/cork/foam? (and finish damage).String Swing Hangers and Stands , have been fine for me for all my guitars for 20+ years , Gibsons , Fenders and PRS
-
Rider1260 replied to the thread I like DGT neck profile - what is closest PRS profile? (+Profile name consusion content).DGT is an interesting neck , narrow at the nut wider as it goes down the neck , a cross between the Pattern reg and the Pattern. The...
-
Rider1260 replied to the thread Abandon Hope All Ye Who Enter Here, Musically Speaking..Really Nice !!!!
-
Rider1260 replied to the thread PRS DGT SE Muddy Tone / HX Stomp tone comparison.I don't hear anything bass heavy , sounds like a humbucker clean to me. It can 100% take some time to get you ear used to a new tone ...
