Recent content by HDJK

Ok, I got original PRS mini toggles (just like in the Paul's Guitars) and went ahead to start modding my HB II. Sidenote: it's been over a month and still no answer from PTC... Since I had to pull the piezo to install the toggles it basically is a Paul's Guitar now, with TCI 58/15LTs, so I used...

So the good news is, I'll be getting the TCI versions, bad news is I'm on my own :) But hopefully I can get it sorted with PCT. If I have a ready made solution for it, I will post it back here. Thanks!

Exactly, they come out of a Wood Library Custom 24. Form the seller: These pickups have 4 leads (white, red, green, black), and one lead for ground (orange). So I could basically follow the wiring diagram above when I put in 2 mini toggles then? That would be sweet! Anything I have to consider...

Thanks for that! But looking at that first schematic, the 58/15LTs coming have 4 leads on them (according to the seller). So that wouldn't work? If not, it looks like my only option is to get rid of the piezo volume pot and install a second mini toggle to split the PUs like in a Paul's guitar...

Thanks for your reply! The pickups are being pulled out of a guitar with push/pull splits, so no problem there (except for the one, where I don't know how to wire it ;-)) If you don't mind me asking, which part of scenario 3 is a no-go?

Glad I found this thread! I have a HB II with the piezo and a pair of 58/15 LTs coming my way. So now there's 3 scenarios for mods: - I'd like to mod the tone knob to be a bass roll-off. I found a diagram, showing just a 0.0028mf capacitor in series between the hot lead from the 3 way switch...

I know, old thread... but I have some new pickups on order for my HB II and would like to ditch the piezo, install a coil split with two mini toggles and also mod the tone knob to be a bass roll off. Problem is, even with the PRS wiring diagrams I'm not quite sure how to pull it off. LJD hasn't...