Recent content by Dan-d-1985

  1. Dan-d-1985

    Custom Ebony Core Mira Pickguards (UK/EU source?)

    I did wonder if PTC might do this, but it would be so low volume that it's probably not worth the effort...
  2. Dan-d-1985

    Custom Ebony Core Mira Pickguards (UK/EU source?)

    Sadly not an option, they only sell what's on their site. The hunt continues.
  3. Dan-d-1985

    Custom Ebony Core Mira Pickguards (UK/EU source?)

    Hi folks, I was chatting with the PRS team in the UK about sourcing some custom ebony pickguards for my 2012 core Mira, but it's not something I can get through the system, so I'm wondering if anyone knows someone (ideally UK-based, but EU too) who could make a couple of pickguards? I'm going...
  4. Dan-d-1985

    59/09 4 conductor wiring guide

    Yeah, I was working off the tremonti wiring schematic for the treble p'up, but I'm not having luck with either the tap or the bridge in general and just swapping white and black for the neck hot/ground as that's pretty common for PRS p'ups. I realised that actually, I only need to solder EITHER...
  5. Dan-d-1985

    59/09 4 conductor wiring guide

    Hi guys, could you possibly clarify the wiring code for the 59/09 pickups? I have a covered neck and squabbin bridge. Both have black/white/red/green and shield. Am I right that the red and green like the tremonti treble are the coil tap wires that are soldered together and then the...
  6. Dan-d-1985

    Dragon 1 wiring which wires are which?

    Hi folks, does anyone know which is hot and ground for each of the dragon-1's bridge and neck p'ups? Is it like the HFS/VB where black is hot on HFS and white ground with the VB being white hot and black ground? Or does it not matter as long as only one uses white as hot and the other...
  7. Dan-d-1985

    WHAT FOOD CAN YOU NOT PUT DOWN?

    I'm a sucker for cinema sweet popcorn or honey roasted cashew nuts.
  8. Dan-d-1985

    What is the role of the resistors on the DGT tap section?

    Thanks for the info, really useful. I'm thinking of applying this to my HFS/VB, so just curious as to if I would get much benefit. Further mod incoming.... ^_^
  9. Dan-d-1985

    What is the role of the resistors on the DGT tap section?

    As per the title, i'm curious about the 1.1k and 2.2k resistors. What are the benefit to having them as the path to ground? Is it playing on RC filter circuit lines and changing cutoff frequency so the sounds are darker or something along those lines (or completely not :( ). Has anyone...
  10. Dan-d-1985

    Will stopbar tailpiece slots accommodate a set of size .013 -.062/.065 strings?

    I've heard nothing but praise for the Scroeder bridge on SE and US PRS guitars. They have all been slotted before shipping AFAIK and get it right first time. If you're gonna do it, go Schroeder if a PRS adjustable isn't viable (though if it's a dream to make a proper monster, why not wait a...
  11. Dan-d-1985

    Rhythm/Treble washer on a Singlecut??

    I'm very much of the no ring opinion. It's the first thing i've removed with any LP i've owned as I much prefer the clean look. Same with pick guards, take them off! If it's your thing tho, bash on! I'd love to see how it changes the look on a PRS.
  12. Dan-d-1985

    Introducing the Mira-kinda-408 standard ;)

    Just finished a further mod on my Mira this weekend. If you remeber, the first stage was to open up the original toggle switch so I could fit a 3rd 500k pot and re-wire the Mira to have 2 volumes and a master tone (a la DGT) and moved the toggle switch up: An idea some friends put forward...
  13. Dan-d-1985

    2014 Custom 24 guitars- a query.

    Thanks for the clarification Jack, I was liking the look of some of the new finishes, but I'd prefer my cu24 with a thin neck for sure!
  14. Dan-d-1985

    2014 Custom 24 guitars- a query.

    Hi folks, can anyone clear up something I wasn't to clear on with the new range info: The 2014 cu24 spec page says neck profile as pattern reg. Does this mean that reg is the only profile that will be offered soon and the thin will be stopped unless I go the artist pack route? Or am I...
  15. Dan-d-1985

    Singlecut Preferences...................Discuss

    My SC is all of my dream spec: 25" sc250, wraparound (fully intonatable bridge) with thin neck profile. Monster guitar. I've not played the 2 piece bridges for comparison, but the original wrap on my Mira is just as good. Still a nightmare to find a thin neck SC by PRS these days.
Back
Top